HEATZONE 150T Devireg Touch Kit – Black

DEVImat 150T Underfloor Heating Kit 

The DEVImat is an extremely high quality 360° fully screened self-adhesive all-in-one mat with FEP insulated conductors and a red PVDF outer sheath (non UV stable). The round profile, low height (only 3.5mm) and robust construction ensure a fast, simple and safe installation perfect for renovating existing floors. Use the 150T Underfloor Heating Kit with the DEVIreg Opti, DEVIreg Smart or DEVIreg Touch. Each kit comes with your mat of choice, a thermostat of choice, sensor, cold tails and a free installation guide. 

Features and Applications 

• Under tile/ in screed applications
• Fast and easy to install 
• Self-adhesive mesh
• Low height – only 3.5 mm 
• Only one cold lead 
• Long lifetime 
• Maximum protection
• DEVImat 20 years Full-Service Warranty

Specifications

Nominal voltage:  230 V~

Construction: Twin conductor with 360° screening, one cold lead

Output: 150W/m² @ 230V~

Max. permissible use temperature, powered: 115 °C

Max. permissible use temperature, unpowered: 120 °C

Cable thickness: 3.0 mm

Deformation strength: 600 N 

Pulling strength: 120 N

Conductor insulation: FEP

Outer sheath: PVDF

Screen: 100% coverage; alu-foil; 0.5 mm² tinned copper drain wire

Cold lead: 4 m DTWB, 2 x 1 mm² with screen

Min. installation temperature: -5 °C

Bending Ø, min: 6 x cable diameter 

IP Class: IPX7

Set with flexpipe: Flexpipe, inner Ø 6.7 mm, outer Ø 10 mm, 2.5 m, Black

DEVIreg Touch 

Features and Applications 

• Big 2” touch screen

• Built-in set up wizard

• Easy and intuitive functionalities

• Adaptive PWM function

• Suitable for several single and multiple frames

• Suitable for several competitors NTC sensors

• Digital time (2 periods programming)

• Easy online troubleshooting

Specifications

Operation voltage: 220V – 240V ~50/60 Hz

Standby power consumption: max. 0.40 W

Relay: Resistive load: 16A / 3680W @ 230V

Inductive load: Cos Φ = 0/3 max. 1A

Sensing unit: NTC 15 KΩ @ 25°C, 3 m (default)

NTC 10 KΩ @ 25°C

NTC 6.8 KΩ @ 25°C

NTC 33 KΩ @ 25°C

NTC 12 KΩ @ 25°C

NTC 47 KΩ @ 25°C

Regulation: PWM – Pulse Width Modulation

Ambient temperature: 0°C to 30°C

Frost Protection: 5°C to 9°C

Floor temperature limit: Max. 20°C to 35°C (45°C)

Min. 10°C to 35°C (45°C)

Temperature range: 5°C to 35°C (room)

Storage temperature: -20°C to 65°C

Cable specification max. 1 x 4 mm² or 2 x 2.5 mm²

Ball pressure test temperature: 75°C

Pollution degree: 2 (domestic use)

Controller type: 1 C

Software class: A

IP Class: 21

Protection class: Class II

Dimensions (H/W/D): 85 mm x 85 mm x 20-24 mm (in-wall depth: 22 mm)

Weight: 115g

Try out the DEVIreg Touch online here!