DEVImat 100T Underfloor Heating Kit
The DEVImat is a high quality, 360° fully screened self-adhesive all-in-one mat with FEP insulated conductors and a red PVDF outer sheath (non UV stable). The round profile, low height (only 3.5mm) and robust construction ensure a fast, simple and safe installation perfect for renovating existing floors. Use the 100T Underfloor Heating Kit with the DEVIreg Opti, DEVIreg Smart or DEVIreg Touch. Each Kit comes with your mat of choice, a thermostat of choice, sensor, cold tails and a free installation guide.
Features and Applications
- Under tile/ in screed applications
- Fast and easy to install
- Self-adhesive mesh
- Low height – only 3.5 mm
- Only one cold lead
- Long lifetime
- Maximum protection
- DEVImat 20 years Full-Service Warranty
Specifications
Nominal voltage: 230 V~
Construction: Twin conductor with 360° screening, one cold lead
Output: 100W/m² @ 230V~
Max. permissible use temperature, powered: 115 °C
Max. permissible use temperature, unpowered: 120 °C
Cable thickness: 3.0 mm
Deformation strength: 600 N
Pulling strength: 120 N
Conductor insulation: FEP
Outer sheath: PVDF
Screen: 100% coverage; alu-foil; 0.5 mm² tinned copper drain wire
Cold lead: 4 m DTWB, 2 x 1 mm² with screen
Min. installation temperature: -5 °C
Bending Ø, min: 6 x cable diameter
IP Class: IPX7
Set with flexpipe: Flexpipe, inner Ø 6.7 mm, outer Ø 10 mm, 2.5 m, Black
DEVIreg Smart
Features and Applications
-
Wi-Fi connectivity
-
Remote controllable via DEVIsmart App
-
Paired with up to 10 mobile devices using the DEVIsmart App
-
Can communicate with two mobile devices simultaneously
-
With one DEVIsmart App, you can control as many locations with as many DEVIreg Smart thermostats as needed
-
Adaptive PWM function
-
Suitable for many foreign single and multiple frames
-
Suitable for many foreign competitive NTC sensors
-
Digital time 5-period programming
Specifications
Operation voltage: 220V – 240V ~50/60 Hz
Standby power consumption: max. 0.40W
Relay: Resistive load: 16A / 3680W @ 230V
Inductive load: Cos Φ = 0/3 max. 1A
Sensing unit: NTC 15 KΩ @ 25°C, 3 m (default)
NTC 10 KΩ @ 25°C
NTC 6.8 KΩ @ 25°C
NTC 33 KΩ @ 25°C
NTC 12 KΩ @ 25°C
NTC 47 KΩ @ 25°C
Regulation: PWM – Pulse Width Modulation
Ambient temperature: 0°C to 30°C
Frost Protection: 5°C to 9°C (default 5°C)
Floor temperature limit: Max. 20°C to 35°C (45°C)
Min. 10°C to 35°C (45°C)
Temperature range: 5°C to 35°C (room)
Storage temperature: -20°C to 65°C
Cable specification max. 1 x 4 mm² or 2 x 2.5 mm²
Ball pressure test temperature: 75°C
Pollution degree: 2 (domestic use)
Controller type: 1 C
Software class: A
IP Class: 21
Protection class: Class II
Dimensions (H/W/D): 85 mm x 85 mm x 20-24 mm (in-wall depth: 22 mm)
Weight: 115g
Reviews
There are no reviews yet.